Heat Shrinking Tube Protector Fiber Protection Sleeves 40mm With
Ribbon 12F
Fusion-Protection Sleeves
Clear Optic fiber cable Splice Protection Sleeves is a specially
designed crosslinked Clear Heat Shrinkable tubing, with Clear
fusion tubing liner, providing SS304 strength member and protection
to fiber optical splices.
Features:
* Cross-linked polyolefin with one piece clear sleeve design
* Pre-installed steel rod or ceramic rod
* Different colors of hot fusion insert
* Single & ribbon fiber splice protector available
* Operating temperature: -55~100℃
* Shrink temperature: 120 ℃
* Typical application
Applicable to: optical fiber connection protection components, does not affect
the optical fiber optical properties, fiber welding use.
Specification:
| Item | Description | Sleeving | Outer tube (Heat-shrinkable) | Inner tube
(Hot-melt glue) | Strenght Member | Unit |
| Diameter (Before shrink) | Diameter (After shrink) | Length | Inner Diameter | Outside diameter | Length | Inner Diameter | Outside diameter | Length | Diameter | Length |
| 1 | Fiber Protection Sleeves _11mm_φ1.9_Without Strength Member | 1.9±0.1 | 1.25±0.1 | 11±0.1 | 1.4±0.1 | 1.9±0.1 | 11±0.1 | | | | | | MM |
| 2 | Fiber Protection Sleeves _15mm_φ1_with Strength Member | 1.8±0.1 | 1.4±0.1 | 15±0.1 | 1.5±0.1 | 1.8±0.1 | 15±0.1 | 0.5±0.1 | 0.9±0.1 | 15±0.1 | 0.5±0.1 | 14±0.1 | MM |
| 3 | Fiber Protection Sleeves _20mm_φ3_Without Strength Member | 3.9±0.1 | 2.5±0.1 | 20±0.1 | 3.4±0.1 | 3.9±0.1 | 20±0.1 | | | | | | MM |
| 4 | Fiber Protection Sleeves_20mm_φ4_Without Strength member | 4.4±0.1 | 3.0±0.1 | 20±0.1 | 4.0±0.1 | 4.4±0.1 | 20±0.1 | | | | | | MM |
| 5 | Fiber Protection Sleeves_25mm_φ1.8 | 1.8±0.1 | 1.4±0.1 | 25±0.1 | 1.5±0.1 | 1.8±0.1 | 25±0.1 | 0.5±0.1 | 0.9±0.1 | 25±0.1 | 0.5±0.1 | 24±0.1 | MM |
| 6 | Fiber Protection Sleeves_25mm_φ2.3 | 2.3±0.1 | 1.7±0.1 | 25±0.1 | 1.7±0.1 | 2.3±0.1 | 25±0.1 | 0.8±0.1 | 1.4±0.1 | 25±0.1 | 0.5±0.1 | 24±0.1 | MM |
| 7 | Fiber Protection Sleeves _24mm_ribbon _8F | 3.3±0.1 | 2.8±0.1 | 25±0.1 | 2.8±0.1 | 3.3±0.1 | 25±0.1 | 2.0±0.1 | 2.3±0.1 | 25±0.1 | 25x2x0.4 | 22±0.1 | MM |
| 8 | Fiber Protection Sleeves_34mm | 2.3±0.1 | 1.7±0.1 | 34±0.1 | 1.7±0.1 | 2.3±0.1 | 34±0.1 | 0.8±0.1 | 1.4±0.1 | 34±0.1 | 0.5±0.1 | 33±0.1 | MM |
| 9 | Fiber Protection Sleeves_35mm | 3.4±0.1 | 2.4±0.1 | 35±0.1 | 2.7±0.1 | 3.2±0.1 | 35±0.1 | 1.2±0.1 | 1.9±0.1 | 35±0.1 | 1.0±0.1 | 30±0.1 | MM |
| 10 | Fiber Protection Sleeves_40mm | 4.2±0.1 | 3.0±0.1 | 40±0.1 | 3.4±0.1 | 3.9±0.1 | 40±0.1 | 1.6±0.1 | 2.2±0.1 | 40±0.1 | 1.5±0.1 | 35±0.1 | MM |
| 11 | Fiber Protection Sleeves_40mm_Ribbon _12F | 5.5±0.1 | 4.4±0.1 | 40±0.1 | 3.9±0.1 | 4.4±0.1 | 40±0.1 | 3.6±0.1 | 5.0±0.1 | 40±0.1 | 25x3x0.4 | 39±0.1 | MM |
| 12 | Fiber Protection Sleeves_45mm | 4.2±0.1 | 3.0±0.1 | 45±0.1 | 3.4±0.1 | 3.9±0.1 | 45±0.1 | 1.6±0.1 | 2.2±0.1 | 45±0.1 | 1.5±0.1 | 40±0.1 | MM |
| 13 | Fiber Protection Sleeves_45mm_With magnetic | 3.4±0.1 | 2.4±0.1 | 45±0.1 | 2.7±0.1 | 3.2±0.1 | 45±0.1 | 1.2±0.1 | 1.9±0.1 | 45±0.1 | 1.0±0.1 | 40±0.1 | MM |
| 14 | Fiber Protection Sleeves_50mm | 4.2±0.1 | 3.0±0.1 | 50±0.1 | 3.4±0.1 | 3.9±0.1 | 50±0.1 | 1.6±0.1 | 2.2±0.1 | 50±0.1 | 1.5±0.1 | 45±0.1 | MM |
| 15 | Fiber Protection Sleeves_60mm | 4.2±0.1 | 3.0±0.1 | 60±0.1 | 3.4±0.1 | 3.9±0.1 | 60±0.1 | 1.6±0.1 | 2.2±0.1 | 60±0.1 | 1.5±0.1 | 55±0.1 | MM |
| 16 | Fiber Protection Sleeves_8mm_φ1.3_Without Strength Member | 1.6±0.1 | 1.1±0.1 | 8±0.1 | 1.3±0.1 | 1.6±0.1 | 8±0.1 | | | | | | MM |
| Continuous use temperature(℃) | -45 - 110 |
| Radial shrinkage Rate (%) | ≥50 |
| Axial Shrinking Rate (%) | ≤5 |
| Low Temperature Property | No crackle at -55℃ lasting 4 hours |
| Normal Operation Relative Humidity (%) | ≤95 |
| Spark -over Strength (kV/mm) | ≥20 |
| Tensile Strength (Mpa) | 14 |
| Tensile strength after aging(Mpa) | 10 |
| Elongation at break after aging (%) | 200 |
| Dielectric strength (KV/mm) | ≥25 |
Pictrues:
